|
Post by Daiuske Ide on Oct 9, 2013 2:26:57 GMT
Hi JohnC
I knew in the FF forum you. I am looking forward to your new products.
Thanks, Daisuke
|
|
|
Post by JohnC on Oct 9, 2013 6:44:47 GMT
Hey Paul,
Good to see you here.
The original CARVEC software should work on all versions of windows. I run it without a problem and 32- and 64- bit versions of 7 and 8.
JohnC
|
|
paul
Gimbal Cleaner
Posts: 2
|
Post by paul on Oct 15, 2013 21:51:36 GMT
Hi John Thanks for that,Nice to hear from you. I have put the disc onto my computer, but i do not have a lead to connect to my computer.I have a 9 pin female connector, is there something that will link this to my computer or could you supply me with one.
Regards
Paul
|
|
|
Post by ctrlfreq on Nov 30, 2013 15:15:33 GMT
im interested in using this with a movi-like brushless gimbal. am i clear in understanding i need one radian module and then to purchase a license (somewhere around $350?) and this will control all 3 axis' ?
|
|
|
Post by Bart C. on Dec 29, 2013 15:05:53 GMT
Hello John
As the operator of a dedicated multi-rotor forums site I'd like to commend you for your honesty in making the Radian do what it was originally intended to do which is provide control via ONE unit! I'm in the process of trying to secure a Radian for use on one of my 2-axis servo driven camera mounts and as the subject of a review of your G-Lock project.
Good luck and continued success with your efforts. Looking forward to getting started.
Bart
|
|
|
Post by JohnC on Dec 29, 2013 16:58:59 GMT
Bart: Thanks a lot. The G-Lock has quite a lot of things in it which I always wanted to have in the Radian, but the relationship with Freefly stopped me from doing it. Amongst other things it has configurable slew acceleration control which helps a lot for smoother Pan control using the Cinestar 'o' ring dampers, a 'proportional' mode for shoulder-lever operation, Servo mounts gain adjustable using an RC channel and many more orientation options for different mounts.
ctrlfreq: Sorry I missed your post : yes, one Radian upgraded to G-Lock will do all 3-axis. There are quite a few second hand Radians around now and I will add a 'for sale' section to this forum shortly to make it easier for people to find them.
JohnC
|
|