|
Post by Carvec Systems on Jan 21, 2014 7:27:48 GMT
The latest firmware for the signal master module is 0.6 : RCSignalMaster-0.6.fw (31.41 KB)
Please also ensure the G-Lock firmware is updated to 1.07 or later.
Please ensure you update the module to this version before using it with BLD modules on the CARVEC HSL bus.
The PC software can be downloaded from Here
This new version is to match the revised HSL data from the G-Lock : the functionality is unchanged.
|
|
|
Post by ovdt on Jan 21, 2014 21:39:21 GMT
Hello John,
Just for the record, can you please confirm how to initate the bootloader mode on Signal Master?
Thanks.
|
|
|
Post by JohnC on Jan 23, 2014 10:25:29 GMT
Yes of course : like all the CARVEC Bootloaders, you short the two PC data pins together during power up. For the signal master these are the signal pins of ports 5 and 6. And also as normal, the LED's will light solid to show you were successful.
|
|