|
|
Post by Admin on Jul 3, 2013 1:51:05 GMT
|
|
|
|
Post by GVentura on Jun 2, 2015 10:46:51 GMT
can you please tell me what is the max current for each servo output (for the signal master)
|
|
|
|
Post by JohnC on Jun 2, 2015 19:10:19 GMT
Hi,
The PWM servo outputs have 330 ohm protection resistors in series so if the output was shorted to ground, it would source 10mA.
This is more than enough to drive the PWM signal to standard RC Servo motors.
|
|
|
|
Post by uvalzi on Aug 26, 2018 14:11:25 GMT
hello,
is it possible to input 2 ppm signals (from 2 different receivers, one as primary and the other as secondary), and output 2 Sbus signals (again, one as primary and the other as secondary)?
|
|
