|
Post by Admin on Oct 11, 2013 6:30:07 GMT
The new CARVEC bootloader for upgrading and updating the G-Lock can be downloaded from: CARVEC BootloaderPlease post any issues or problems you have in this thread ....
|
|
|
Post by windmania on Dec 19, 2013 22:36:28 GMT
Will the Radian programming board and USB work with this?
|
|
|
Post by JohnC on Dec 20, 2013 7:18:18 GMT
Yes, they work fine with all modules. The Signal-Master uses the same cable is the radian, but the BLD modules use a straight 3-pin connector instead of the 6-pin (the cable is supplied with the BLD modules).
We also have our own stock of the USB modules for people who buy second-hand Radians to upgrade (they were designed by CARVEC originally).
|
|
stevet
Gimbal Cleaner
Posts: 9
|
Post by stevet on Jan 10, 2014 19:40:06 GMT
Hi John
Struggling with this. Getting no response either on the default port COM4 or the correct COM10. Thought it was VMWare emulator on my Mac that might be the issue. Tried now on a PC and still no response. Tried a second Radian and unfortunately the same. Must be the Freefly USB I am using or the connections. But the lights on the USB and Radian are responding, the green solid and the amber pulsing. Either need some ideas and/ or a Carvec USB!!
Steve
|
|
katya
Gimbal Cleaner
Posts: 7
|
Post by katya on Jan 10, 2014 21:51:24 GMT
Hi Steve. have you put the radian into bootloader mode? I'm not near mine at the moment but as far as I can remember there should be no pulsing lights once in bootloader mode. kat
|
|
stevet
Gimbal Cleaner
Posts: 9
|
Post by stevet on Jan 11, 2014 17:47:00 GMT
Kat, many thanks. You are right. For those reading this needing the same help. The green light and the orange on the radian should be both solid NOT pulsing!!
Thanks Steve
|
|