|
Post by E-Copter on Aug 5, 2013 15:36:06 GMT
After upgrading to G-Lock firmware and starting a " fresh" configuration, if the PAN servo does not run, make sure that : 1) In the TILT menu, the Data Out has " Servo" selected instead of HSL LInk. The HSL is a High Speed proprietary link to connect to the SM ( Signal Master) or other devices. 2) Once you have configured the Pan servo and other functions, if the servo does not run, you might need simply to disconnect / reconnect the USB dongle on the module. DOn't forget to save your files especially after upgrading and especialy right after resetting the configurations. BEst regards, Fabien Attachments:
|
|