|
Post by Vladislav on Oct 6, 2019 16:18:42 GMT
Hi!
We have a roupe trolley with remote control. (https://www.defy-products.com/24v)
Inside installed a board with the name "CARVEC sled control pro"
We have some problems with the firmware and the manufacturer sent a firmware update but did not tell us how to put the board in programming mode. Could you help us?
Thank you!
|
|
|
Post by Vladislav on Jun 10, 2021 14:42:36 GMT
Hello John! A couple of years ago we had a correspondence, and the other day I wrote you a letter, but the mail server reported that such an address no longer exists. If it is convenient, could you write to me at the address Vladislav.Fedorov@matchtv.ru
Thank you!
|
|