milo
Gimbal Cleaner
Posts: 13
|
Post by milo on Jan 16, 2014 17:17:28 GMT
Can the radian be mounted in any orientation? If so I assume you must tell the software how the radian was mounted.
Does the position of the radian matter or just anywhere on/under/behind the camera?
|
|
kariy
Gimbal Cleaner
Posts: 13
|
Post by kariy on Jan 16, 2014 21:57:22 GMT
There is a wizard in configuration software to visually indicate the mounting orientation. When you open the wizard it will be super easy to get it right. But don't know about the position does it make any difference.
|
|
milo
Gimbal Cleaner
Posts: 13
|
Post by milo on Jan 27, 2014 19:59:20 GMT
Thanks. I looked at the wizard and sure enough the orientation I wanted to use is not in the list of options.
Are only those positions shown in the wizard valid orientations of the G-Lock?
I have two choices for G-Lock mounting position. One possibility is under the camera mounting plat in the "flat upside down +90" orientation. The second is on the tilt axis in the "nose up +90" orientation. Which position, if any, is the better position?
I originally hoped to mount it on the tilt axis in the "rear up" orientation as that would simplify wiring but that orientation is not shown in the wizard.
|
|